| R2062 Series |
3 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
|
The R2062 is a CMOS real-time clock IC connected to the CPU by three signal lines, CE, SCLK, and SIO, and configured to perform serial transmission of time and calendar data to the CPU. Further, battery backup switchover circuit and a voltage detector. The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven under constant voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time keeping current is small (TYP. 0.4µA at 3V). The oscillation halt sensing circuit can be used to judge the validity of internal data in such events as power-on; The supply voltage monitoring circuit is configured to record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32.768kHz clock output function (CMOS output) is intended to output sub-clock pulses for the external microcomputer. The oscillation adjustment circuit is intended to adjust time counts with high precision by correcting deviations in the oscillation frequency of the quartz crystal unit. Battery backup switchover function is the automatic switchover circuit between a main power supply and a backup battery of secondary battery. |
|
| Feature |
|
| ● Minimum Timekeeping supply voltage | Typ. 0.75V (Max. 1.00V); VDD pin |
| ● Low power consumption | 0.4µA TYP (1.0µA MAX.) at VDD=3V |
| ● Built-in Backup switchover circuit (can be used for a primary battery, a secondary battery, or an electric double layer capacitor) | |
| ● Three signal lines (CE, SCLK, and SIO) required for connection to the CPU.(Maximum clock frequency of 1MHz (with VCC = 3V)) | |
| ● Time counters (counting hours, minutes, and seconds) and calendar counters (counting years, months, days,and weeks) (in BCD format) | |
| ● Interrupt circuit configured to generate interrupt signals (with interrupts ranging from 0.5 seconds to 1 month) to the CPU and provided with an interrupt flag and an interrupt halt | |
| ● 2 alarm interrupt circuits (Alarm_W for week, hour, and minute alarm settings and Alarm_D for hour and minute alarm settings) | |
| ● Built-in voltage detector with delay | |
| ● With Power-on flag to prove that the power supply starts from 0V | |
| ● 32-kHz clock output pin (CMOS output. “H” level is always equal to VCC.) | |
| ● Supply voltage monitoring circuit with two supply voltage monitoring threshold settings | |
| ● Automatic identification of leap years up to the year 2099 | |
| ● Selectable 12-hour and 24-hour mode settings | |
| ● Built-in oscillation stabilization capacitors (CG and CD) | |
| ● High precision oscillation adjustment circuit | |
| ● CMOS process | |
| ● Package | FFP12 (2.0mm x 2.0mm x 1.0mm : R2062Kxx, SSOP16 (5.0mm x 6.4mm x 1.25mm : R2062Sxx(Preliminary)), |
| Applications | |
| ● Communication devices(multi function phone, portable phone, PHS or pager) | |
| ● OA devices(fax, portable fax) | |
| ● Computer(desk-top and mobile PC, portable word-processor, PDA, electric note or video game) | |
| ● AV components (portable audio unit, video camera, camera, digital camera or remote controller) | |
| ● Home appliances(rice cooker, electric oven) | |
| ● Other(car navigation system, multi-function watch) | |
| Data Sheet(PDF) | |
| R2062 Series | |